EMO 2017:

Are Machine Tools Safe? Depend on it!


The safety of machine tools is a major issue. Complex machinery, high speeds, and high power levels can be a dangerous mixture for the operator. Nevertheless, machine tools are very safe products.


Many stakeholders have been collaborating for a long time to reach the current safety  level: machine tool manufacturers, operators, health and safety experts, EU policy-makers and international standardisation groups.


At the Safety Day for Machine Tools at EMO Hannover 2017, top experts will present their insights on the requirements and challenges entailed by the current state of the art, mapping out how practical solutions ensure high levels of safety and elucidating what remains to be done in the future.



Heinrich Mödden,

a machinery safety expert at the EMO organizer

VDW (German Machine Tool Builders' Association)

Image: VDW





It is a remarkable story: "For many decades, our companies have proven that they can handle the risks that come with the operation of machine tools", explains Heinrich Mödden, a machinery safety expert at the EMO organizer VDW (German Machine Tool Builders' Association). Certainly there is a lot of work still needed, but, as Mr. Mödden continues, "it pays off, as the number of accidents is continuously declining." This shows that a high level of safety has already been achieved with traditional design practices.


Machine tools: Safety Inside!


A large contribution to this gratifying trend has to be attributed to European Machinery Directive 2006/42/EC (MD), which was issued in 1993 and aimed at levelling the safety standards for machinery across the European Union. "The EU Machinery Directive has been a success story, making working environ-ments significantly safer and reducing hazards", says Felicia Stoica, policy officer for the Machinery Directive at the European Commission's Directorate-General for Growth. "The involvement of all stakeholders in the machinery sector, especially manufacturers and their equipment suppliers, has ensured that the actions taken are practicable and beneficial."


The MD takes manufacturers of machine tools into its focus, too, and they have to conduct risk assessments for their design. Since the first version of the MD was established, there have been considerable alterations in the standardization environment covered by this directive and in particular to risk assessment. As a result, the safety requirements are still being animatedly discussed, e.g. the reliability of mechatronics in safety functions.


Following strict subsidiarity, such rules for safety measures are formulated by expert panels in standardisation processes. For machine tools, this work is being performed on a global ISO level. Hence, many of the international market actors are negotiating about the state of the art. "Machine safety evokes strong involvement of companies or authorities. It can be a tough job to find a consensus", states Christian Neumeister, secretary of the ISO working group for safety of milling machines. "But in the end, we usually find compromises to satisfy the demands of health and safety authorities and keep the effort involved for the industrial sector to an acceptable level."


Functional safety: the next span thing


Functional safety means that safety has to be proven by quantification of failure probabilities. For machine tools, this is quite difficult, as hazards can be high, even though they occur very rarely. In a scientific study that the VDW organized on behalf of its member bodies, Nika Nowizki from the University of Stuttgart analysed the running times of 578 multi-spindle automatic lathes with a total of 3951 spindles using mostly standard PLC controllers. These produced not a single safety-related accident in over 93,333,000 machine hours of operation evaluated since 1992. "We were happy to see that our gut feeling was scientifically reconfirmed" smiles Eberhard Beck, Head of Machine Control Design at the lathe manufacturer Index in Esslingen, Germany. "It shows that our high safety level is attributable not only to single components, but to our long-term empirical design principles according to product safety standards, which are proven-in-use."


Still, many safety subjects need further insights. For example, the recent development of turning operations on milling centres is causing uncertainty among manufacturers and their customers as to whether the proven-in-use argument for machine tools remains valid for the future. An intermediate conclusion is that this is only possible when the suppliers of clamping devices are involved.


Another subject is market surveillance. Machine tools are complex products, usually custom-built, and too large and expensive for lab testing. This means it is difficult to determine on-site if the design is compliant with safety regulations. In particular, market surveillance authorities lack qualified personnel and time to investigate. One concept to help market surveillance authorities in doing their job is the CE Guides on Machine Tool Safety published by Cecimo, the European Machine Tool Association. In simple words, with instructive illustrations, they spotlight the important aspects involved. "If we want to have a level playing field with all market participants, we need to assist market surveillance authorities in doing their job better", points out Maitane Olabarria of Cecimo. After sawing and EDM machines, the recently finished safety standard for milling machines, ISO 16090, triggered the publication of a new guide to be presented at EMO Hannover.


"The proximity to the EMO exhibition makes it possible to see how the design concepts of modern machine tools have been enhanced once again", Mr. Mödden concludes. As a consequence, not only the aspects of machine manufacturers are to be discussed, but also the vital connection to the equipment suppliers, as well as the reflections of occupational safety executives arising from their field experience.


The expected conclusion of the EMO Safety Day is also an appeal to all worldwide manufacturers to ensure that machine tools which are being designed in accordance to the relevant product safety standards and which are also being operated in accordance with their intended use can be considered safe!



Source: Deutsche Messe AG, VDW


News

  • 24.5.2019
    New: Arburg Technology Center in Portugal
  • 24.5.2019
    Final Call for EUBCE 2019 in Lisbon, Portugal
  • 24.5.2019
    Arburg Thailand has Expanded
  • 23.5.2019
    New: Arburg Technology Center in Portugal
  • 23.5.2019
    Bosch to be Carbon Neutral Worldwide by 2020
  • 23.5.2019
    Robert Bosch Venture Capital invests in Veego Software
  • 17.5.2019
    euvend & coffeena 2020 parallel to ORGATEC
  • 17.5.2019
    Trina Solar Receives IEC Certification for Next Generation PV Modules
  • 16.5.2019
    ifo Institute: Economic Experts Fear Tariff War Will Shrink World Trade
  • 16.5.2019
    NürnbergMesse’s Indian Portfolio Grows to 16 Trade Fairs
  • 16.5.2019
    GTAI: New Record: Foreign Direct Investment in Germany
  • 15.5.2019
    COMPAMED 2019: Top Bookings at the Top Event for Medical Technology Suppliers
  • 15.5.2019
    SPIEF 2019 to Host the International Youth Economic Forum
  • 15.5.2019
    E world energy & water 2020 Focuses on Recruiting
  • 13.5.2019
    IFFA 2019 – Where Tradition Meets High Tech
  • 13.5.2019
    IE expo China 2019: Demand for environmental technology in Asia scales new heights
  • 13.5.2019
    SCHMOLZ + BICKENBACH with Lower EBITDA in a Challenging First Quarter
  • 7.5.2019
    LIGNA 2019: Future Showcase for the Woodworking and Timber Processing Industries
  • 7.5.2019
    parts2clean 2019: Future-proofing the Cleaning of Industrial Parts
  • 7.5.2019
    ASMC 2019 Highlights Latest Advanced Manufacturing Strategies
  • 6.5.2019
    New Dates: IPM DUBAI and WOP DUBAI from November 12 to 14, 2019
  • 6.5.2019
    SCHMOLZ + BICKENBACH AG: Jens Alder elected as new Chairman
  • 6.5.2019
    Save the date - Intersolar Summit Spain
  • 3.5.2019
    SEMI and TechWorks Sign Multi-year Agreement
  • 3.5.2019
    Deutsche Messe Becomes International Partner of Energy Tradeshow SETA
  • 3.5.2019
    Buehler at CONTROL 2019
  • 2.5.2019
    Beviale Moscow to be Held in New Location in March 2020
  • 2.5.2019
    SCHMOLZ + BICKENBACH AG: Jens Alder Elected as New Chairman
  • 2.5.2019
    Meyer Burger Concludes Divestment of Wafer Business to Precision Surfacing Solutions
  • 30.4.2019
    PaintExpo 2020 – Trends und Impetus for Coating Technology
  • 30.4.2019
    Covestro Confirms Full Year Guidance After First Quarter
  • 30.4.2019
    Wibu-Systems joins the debut exhibitors at the medical technology expo T4M
  • 29.4.2019
    Covestro Confirms Full Year Guidance After First Quarter
  • 26.4.2019
    SEMI ISS Europe 2019: Enabling Digital Innovation Opportunities
  • 26.4.2019
    SEMI Partners with Powerhouses imec, CEA-Leti and Fraunhofer to Energize Global Innovation
  • 26.4.2019
    Meyer Burger Completes Transformation of Executive Board
  • 25.4.2019
    Lufthansa Promotes the European Elections
  • 25.4.2019
    drupa: The 6th report has been published
  • 24.4.2019
    North American Semiconductor Equipment Industry Posts March 2019 Billings
  • 24.4.2019
    Must-attend Event for the Tool, Pattern and Mould Making Industry
  • 24.4.2019
    TDK Teams With Immersion on Haptics
  • 23.4.2019
    POWTECH and PARTEC 2019: Powerful Process Engineering Duo in Nuremberg
  • 23.4.2019
    FLEX Taiwan 2019 to Showcase Flexible Electronics Innovations and Opportunities
  • 23.4.2019
    Covestro: Dividend Raised for the Fourth Consecutive Year
  • 17.4.2019
    XJet Showcases Expanded Range of AM Application Possibilities at RAPID + TCT 2019
  • 17.4.2019
    Exhibitors will be presenting world novelties at the PCIM Europe 2019
  • 17.4.2019
    New Location for the German House in Tokyo 2020
  • 16.4.2019
    SMC Korea 2019 to Highlight Key Semiconductor Materials Trends, Opportunities
  • 16.4.2019
    Coperion and Coperion K-Tron at Chinaplas 2019
  • 15.4.2019
    PaintExpo 2020 – Trends und Impetus for Coating Technology
  • 15.4.2019
    Trade Fair for Deburring Technology and Precision Surface Finishing in Karlsruhe
  • 11.4.2019
    Intersolar AWARD 2019: Finalists Announced
  • 11.4.2019
    2018 Global Semiconductor Equipment Sales Jump to Record $64.5 Billion
  • 10.4.2019
    EIT Community Opens its First Hub in Silicon Valley
  • 10.4.2019
    Coperion at Chinaplas 2019
  • 9.4.2019
    Digital Solar & Storage 2019: Save the Date and Call for Presentations
  • 9.4.2019
    Upbeat Industry Coming Together Once Again at DELHIWOOD 2019
  • 9.4.2019
    POWTECH and PARTEC Host Expert Knowledge-sharing Platform
  • 5.4.2019
    Deutsche Messe: To be the World's First 5G-powered Tradeshow Venue
  • 5.4.2019
    Covestro takes Gold Again in International Rating
  • 5.4.2019
    my-PV GmbH: First Solar Electric Water Heater Installed in Namibia
  • 4.4.2019
    Control 2019 – QA Innovations in a New Format
  • 3.4.2019
    Rapid.Tech + FabCon 3.D 2019: 3D printing, Spotify style
  • 3.4.2019
    Weidmüller and IDEC Announce Strategic Partnership
  • 3.4.2019
    Young innovative companies to present themselves at FIBO 2019
  • 2.4.2019
    SolarEdge: PV Monitoring Reaching New Heights
  • 2.4.2019
    TDK wins the Austrian VERENA award for CeraCharge™
  • 2.4.2019
    Arburg at Rapid + TCT 2019
  • 1.4.2019
    Weidmüller at the PCIM 2019
  • 1.4.2019
    Future Energy: Renewable Energy has Become Cheaper than Conventional Energy in the GCC
  • 29.3.2019
    Lufthansa Group Honored for its Good Corporate Citizenship
  • 29.3.2019
    Meyer Burger acquires 18.4% of Oxford PV
  • 28.3.2019
    EIT Community opens its first Hub in Silicon Valley
  • 28.3.2019
    Covestro Fosters Open Innovation in China
  • 27.3.2019
    SolarPower: Spain - Europe´s Re-Awakened Solar Giant
  • 27.3.2019
    Lufthansa is ATW Airline of the Year 2019
  • 26.3.2019
    ETIP Bioenergy: Delegated Regulation for High ILUC Risk Feedstock is a Step Forward
  • 26.3.2019
    Trail Enters Into an Exclusivity Agreement for the Acquisition of Electropoli
  • 25.3.2019
    European coating show 2019 Larger and More International than Ever
  • 25.3.2019
    NürnbergMesse’s Indian Portfolio Grows to 16 Trade Fairs
  • 22.3.2019
    POWTECH Launches New "Networking Campus" Think Tank in 2019
  • 22.3.2019
    Meyer Burger – Strategic Partnership with Oxford PV
  • 21.3.2019
    LOPEC 2019: Organic and Printed Electronics Look Positively Into 2019
  • 21.3.2019
    Meyer Burger Awarded Contract for About CHF 15 Million
  • 21.3.2019
    Ettlinger at the Plastics Recycling Show Europe 2019
  • 20.3.2019
    Meyer Burger – Sentis Capital PCC Requests Agenda Items for the Annual General Meeting
  • 20.3.2019
    European Coatings Show 2019: More Exhibitors and more Display Area
  • 19.3.2019
    SCHMOLZ + BICKENBACH AG Announces Changes to the Board of Directors
  • 19.3.2019
    Largest SEMICON China Opens
  • 19.3.2019
    TEFAF Maastrich 2019: Dealers Debut New Discoveries
  • 18.3.2019
    FLEX Japan and MEMS & Sensors Forum to Spotlight IoT, Smart Transportation and MedTech
  • 18.3.2019
    New Covestro Direct Store is Online
  • 18.3.2019
    Pioneering “Modern-day Edison” Joins Tech Elites for SEMICON West
  • 13.3.2019
    SEMI ISS Europe 2019 to Highlight Digital Innovation Ecosystems
  • 13.3.2019
    SCHMOLZ + BICKENBACH Achieves Annual Targets Despite Slowdown in the Fourth Quarter
  • 13.3.2019
    Smart2Go - Smart and Flexible Energy Supply Platform for Wearable Electronics
  • 12.3.2019
    Intersolar Middle East Conference 2019: Data is the Differentiator
  • 12.3.2019
    Meyer Burger Announces Record HJT Cells With Efficiencies Over 24% at PV CellTech
  • 12.3.2019
    Global Fab Spending to See 2019 Decline, New Highs in 2020
  • 11.3.2019
    Hannover Messe 2019: Integrated IT Solutions in Production and Logistics
  • 11.3.2019
    The Success Story of IDS Continues
  • 8.3.2019
    SEMI FlexTech Funds New Cutting-Edge Projects for Flexible Electronics
  • 8.3.2019
    Enforce Tac and U.T.SEC 2019: Nuremberg Exhibition Pairing More Successful Than Ever
  • 7.3.2019
    Brabender Technologie: new feeder line at Powtech
  • 7.3.2019
    EU Court of Auditors’ Superbug Preview Welcomed by COPMA
  • 6.3.2019
    ETIP PV 2019 will take Place in Brussels (Belgium)
  • 6.3.2019
    SMARTER E EUROPE: Jouns Forces with Eurogas and Hydrogen Europe
  • 6.3.2019
    Solar Impulse Foundation: 20th Anniversary of the First Round-the-World in Balloon
  • 5.3.2019
    Women in Semiconductors To Highlight Workplace Diversity at ASMC 2019
  • 5.3.2019
    SEMICON China Keynotes Unveiled as Event Record 100,000 Visitors Expected
  • 5.3.2019
    Covestro Raises Dividend After Strong Business Performance in 2018
  • 4.3.2019
    AB Stelacon to Become Part of Analysys Mason
  • 4.3.2019
    Digital Water Works, Inc. Receives Strategic Investment from Bentley Systems
  • 1.3.2019
    WFES 2020: Investment Partnerships Will Accelerate Clean and ‘Green’ Tech
  • 1.3.2019
    Solar India Conference 2019: Countdown is running in New Delhi (India)
  • 28.2.2019
    Arburg at the Industry Fair 2019
  • 28.2.2019
    Orange joins the ULE Alliance
  • 27.2.2019
    SEMI: Nominations Open for ESD Alliance Governing Council
  • 27.2.2019
    Bosch Increases Investment in Startups
  • 27.2.2019
    EIF and Fraunhofer Join Forces to Establish Joint Technology Transfer Fund
  • 25.2.2019
    Coperion and Coperion K-Tron at the European Coatings Show 2019
  • 25.2.2019
    Schüco International: New Office Opened in Tokyo
  • 25.2.2019
    Siemens is Launching a New Battery Storage for Private Homes
  • 22.2.2019
    SEMI-FlexTech Announces 2019 FLEXI Awards Winners in Flexible Hybrid Electronics
  • 22.2.2019
    Wibu-Systems Opens the Vault at "embedded world 2019"
  • 21.2.2019
    CODESYS Group: Excellent Prospects for 2019
  • 21.2.2019
    SolarPower Summit 2019: Help us shape the future of solar in Europe!
  • 20.2.2019
    Date and venue confirmed for RE-Source 2019
  • 20.2.2019
    parts2clean 2019 – Prime Industry Get-together
  • 20.2.2019
    FeuerTRUTZ 2019 - Where Fire Protection Comes to Life
  • 19.2.2019
    parts2clean 2019 – Prime Industry Get-together
  • 19.2.2019
    Fraunhofer ILT: Laser Processes for Multi-Functional Composites
  • 19.2.2019
    Arburg at Plástico Brasil 2019
  • 18.2.2019
    JEC World 2019: Stratasys to Showcase Latest 3D Printing Advancements
  • 15.2.2019
    Fraunhofer ILT: Producing Polymer Structures Faster – Two processes in One Machine
  • 15.2.2019
    embedded world 2019: Experts Talk about Embedded Intelligence
  • 15.2.2019
    JEC World 2019: Stratasys to Showcase Latest 3D Printing Advancements for Composite Production
  • 14.2.2019
    SEMI Reports: 200 mm Fabs to Add 700,000 Wafers Through 2022
  • 14.2.2019
    Top in Function, Freedom of Design - Materials at the IDS 2019
  • 14.2.2019
    Food Trends at POWTECH 2019
  • 13.2.2019
    Intersolar Middle East Conference 2019: It´s Still About Megas and Gigas
  • 13.2.2019
    Chinaplas 2019: Arburg Setting the Course for the Digital Future of Plastics Processing
  • 12.2.2019
    The Art & Antiques Fair Returns to Olympia, 19 – 28 June 2019!
  • 12.2.2019
    Arburg at Plastimagen 2019: Focus on packaging industry
  • 12.2.2019
    LeisureWorlds 2019 Concept Impressed Exhibitors and Visitors
  • 8.2.2019
    SolarPower Summit 2019: New solar boom in Europe? How, where, why?
  • 8.2.2019
    Friedrich Gerecht Completing Peters’ Field Force
  • 8.2.2019
    Milacron Holdings Corp. To Announce Fourth Quarter 2018 Results
  • 7.2.2019
    John Chong of Kionix Named Chair of MEMS & Sensors Industry Group Governing Council
  • 7.2.2019
    Meyer Burger Divests its Wafering Business to Precision Surfacing Solutions
  • 5.2.2019
    Launch of Key Project to Increase the Efficiency of European Funding for Clean Energy
  • 5.2.2019
    embedded award 2019 – and the nominees are …
  • 5.2.2019
    SEMI-FlexTech Issues 2019 Request for Proposals to Advance Flexible Electronics Ecosystem
  • 4.2.2019
    EU PVSEC 2019 at the Marseille Chanot Convention and Exhibition Centre
  • 4.2.2019
    North American Semiconductor Equipment Industry Posts December 2018 Billings
  • 1.2.2019
    spoga horse spring 2019 Presents the Industry's Highlights
  • 1.2.2019
    LIGNA.Conference goes China
  • 1.2.2019
    Solytic Takes Over Solar Monitoring Portal Suntrol from Solarworld
  • 31.1.2019
    embedded world 2019: RISC-V – High-Calibre Panel Discussion
  • 31.1.2019
    Solytic Takes over Solar Monitoring Portal Suntrol from Solarworld
  • 31.1.2019
    European industry fosters CO2 reutilization
  • 30.1.2019
    AbsInt and Infineon Offer a New Timing Tool Chain for AURIX
  • 30.1.2019
    EU PVSEC 2019 Continues its Focus on R&D
  • 30.1.2019
    Arburg at MECSPE 2019 in Parma (Italy)
  • 28.1.2019
    DeburringEXPO 2019: Perfect Surfaces – Burr-Free, Clean and Precise
  • 28.1.2019
    ISS Europe 2019 Highlights Opportunities in Digital Innovation
  • 28.1.2019
    CLOOS Starts the Anniversary Year
  • 24.1.2019
    Get set for 2019 at ASIA FRUIT LOGISTICA
  • 24.1.2019
    ISPO Beijing Celebrates Successful Anniversary
  • 24.1.2019
    Pharma Trends at POWTECH 2019: Faster Development Time from Laboratory to Process
  • 23.1.2019
    VCI: The German Chemical Industry in Figures Online
  • 23.1.2019
    VDMA: "Treaty of Aachen Must be More than Symbolic Politics"
  • 23.1.2019
    Meyer Burger Technology: New Independent Members of the Board of Directors
  • 22.1.2019
    SEMICON Korea Highlights Smart Tech, Industry Growth and Workforce Development
  • 21.1.2019
    Messe München Expects a Remarkable Year of Fairs in 2019
  • 21.1.2019
    photokina Will Take Place in May 2020
  • 21.1.2019
    LogiMAT 2019: ADS-TEC will be Presenting its Current Vehicle Terminal
  • 18.1.2019
    Successful CIPS 2018 Focused on Innovation
  • 18.1.2019
    VIVANESS 2019: More and More Customers for Natural and Organic Cosmetics
  • 17.1.2019
    Continental AG: World Premiere - Safety Jacket With LED Lights for Enhanced Safety at Work
  • 17.1.2019
    Fruit Logistica: BayWa and Partners with First Joint Trade Fair Presentation
  • 16.1.2019
    Reed Exhibitions Announces Definitive Agreement to Acquire Mack Brooks Exhibitions
  • 16.1.2019
    Covestro Supports Measures Against Plastic Waste
  • 15.1.2019
    embedded world 2019: Premiere - Start-up Area at embedded world
  • 15.1.2019
    BAU 2019: Schüco Acoustic - The City of the Future is Quiet
  • 15.1.2019
    Instrument Systems at the Photonics West 2019
  • 11.1.2019
    Embedded Tech India 2019 Expo in Pragati Maidan (New Delhi/India)
  • 11.1.2019
    Lufthansa Group is Number One in Europe
  • 10.1.2019
    Messe München Further Enhances Integration of its Russian Business Into the Group
  • 10.1.2019
    Intersolar 2019: Renowned Awards Honor Groundbreaking Innovations for the New Energy World
  • 9.1.2019
    SolarEdge to Enter E-Mobility Market with Acquisition of S.M.R.E. Spa
  • 9.1.2019
    SEMI ISS 2019: Enabling the Next Industrial Revolution
  • 9.1.2019
    BayWa Starts World-wide Launch of its Satellite-assisted “Rainmaker”
  • 8.1.2019
    SolarEdge to Enter E-Mobility Market with Acquisition of S.M.R.E. Spa
  • 8.1.2019
    China Wafer Production Capacity Growth Fastest in the World
  • 8.1.2019
    SEMI Taiwan President Terry Tsao Named SEMI Chief Marketing Officer
  • 4.1.2019
    ISM 2019: More Space, More Themes, More Inspiration
  • 4.1.2019
    Arburg at TCT Asia 2019
  • 3.1.2019
    bauma CONEXPO INDIA 2018 Scales New Heights, Resonating the North Indian Market Mood
  • 3.1.2019
    BASF Expands its Production Network for Certified Palm Products
  • 3.1.2019
    Continental Showcases Innovations for Smarter and Safer Cities at CES 2019
  • 2.1.2019
    Lufthansa Group is Looking to Hire More than 5000 New Employees in 2019
  • 2.1.2019
    Embedded Tech India 2019: Fair for Products and Solutions for Embedded Systems
  • 31.12.2018
    Lufthansa Hub Munich Honoured for Sustainable Environmental Management
  • 31.12.2018
    Covestro Taps Into China’s Growing Start-up Scene
  • 31.12.2018
    SolarPower International 2019: New Deadline for Presentation and Speaker Applications
  • 28.12.2018
    BIOFACH 2019: Time to Check in for a Trip Into the Heart of the Organic Community
  • 28.12.2018
    Formnext 2018: Groundbreaking world premieres and records at Formnext 2018
  • 28.12.2018
    ZELLCHEMING-Expo premier a "Road of Maintenance"
  • 27.12.2018
    Continental Pioneers Tire Tests With Self-Driving Test Vehicles
  • 27.12.2018
    Messe Essen Celebrates the Conclusion of the First Construction Phase
  • 27.12.2018
    Another Record Year for ZEISS
  • 21.12.2018
    E.ON Makes a Strategic Investment to a Finnish e-mobility Software Company Virta
  • 21.12.2018
    “Together. Now & Tomorrow.”: Liebherr at Bauma 2019
  • 20.12.2018
    Covestro Taps Into China’s Growing Start-up Scene
  • 20.12.2018
    Arburg at Plastec West 2019: Vertical and Electric Allrounders in Use
  • 20.12.2018
    Expo Wine + Beer in Chile new partner in the global network
  • 19.12.2018
    North American Semiconductor Equipment Industry: Billings goes Down
  • 19.12.2018
    BIOFACH INDIA 2018: Successful Tenth Anniversary
  • 19.12.2018
    CeraCharge™ and PowerHap™ products of the year
  • 18.12.2018
    Central Data Management with CLOOS C-Gate
  • 18.12.2018
    SEMI: Total Fab Equipment Spending Reverses Course
  • 18.12.2018
    Fraunhofer ILT: Formed to Meet Customers’ Needs – New Laser Beams for Glass Processing
  • 17.12.2018
    Smarter E AWARD 2019: Entries Open for 2019 RENOWNED AWARDS HONOR
  • 17.12.2018
    Successful Conclusion of Intersolar India’s 10th Anniversary
  • 14.12.2018
    Meyer Burger Technology Ltd Signed a Major Strategic Contract
  • 14.12.2018
    Arburg at Plastec West 2019
  • 13.12.2018
    SEMI Supports U.S.-Japan Trade Agreement Negotiations in U.S. Government Testimony
  • 12.12.2018
    Deutsche Lufthansa: First Airbus A380 in new Lufthansa Design
  • 12.12.2018
    IPB China Ends on a High Note
  • 10.12.2018
    Premiere: Start-up Area at embedded world 2019
  • 10.12.2018
    FENSTERBAU FRONTALE 2020: Vacuum Glass Makes New Windows Possible
  • 6.12.2018
    Koelnmesse: Settlement Reached in DMEXCO dispute
  • 6.12.2018
    Covestro Concludes Share Buyback of EUR 1.5 Billion
  • 5.12.2018
    iLOQ Cements Collaboration with Avain Yhtiöt Group
  • 5.12.2018
    Lufthansa Supervisory Board decides to expand Executive Board
  • 4.12.2018
    BOAT & FUN BERLIN Reports Successful Business
  • 4.12.2018
    The next photokina will take place in May 2020
  • 4.12.2018
    ProSweets Cologne: The sweet side of Industry 4.0
  • 3.12.2018
    Software AG, Amazon Web Services Expand Relationship at AWS re:Invent 2018

Mobile Website

Our website also works on IPhone, IPad and Co.